Drill and Blast Chamber – TunnelSAFE Slim Line

A Slim Line Drill and Blast Chamber is designed for drill and blast tunnelling operations. This portable refuge chamber can be easily positioned and repositioned; providing an ongoing, adaptable safe refuge solution for the life of the tunnelling project.

The TunnelSAFE Slim Line (SL) Refuge Chamber offers an ideal solution for projects involving feeder tunnels and single-entry development headings, including sub-surface railway stations, hydro-power stations and other complex tunnel networks. The Slim Line features the slimmest shell in the range at 1.6m wide, designed specifically to accommodate tight tunnelling confines.

tunneling-drill-and-blast-construction-tunnelsafe-slim-design-12-person

Drill and Blast Chamber – Virtual Tour

Drill and Blast Chamber – Front View

The ‘face’ of the TunnelSAFE Slim Line is designed primarily for easy identification and quick access during an emergency. The strobe lighting, warning siren and reflective signage alert passers-by to the chamber’s location, whilst the rotating door handles provide simple, straight forward access to the safety of the interior.

Drill and Blast Chamber – Interior View

Inside a TunnelSAFE Slim Line Refuge Chamber, a number of vital life-support systems combine to create a safe, ongoing environment for occupants. Systems include; primary and secondary air (oxygen) supplies, air conditioning systems, positive pressure systems, electrical systems, gas detection and a chemical scrubbing system.

The TunnelSAFE Slim Line uses active chemicals and MineARC’s ELV (extra-low-voltage) Scrubbing System to ‘scrub’ the build up of harmful CO2 (carbon dioxide) and CO (carbon monoxide) from the air inside the refuge chamber.

Drill and Blast Chamber – Rear View

A secure cabinet at the rear of the TunnelSAFE Slim Line houses the refuge chamber’s UPS battery back up (Uninterruptible Power Supply). The UPS is a fail-safe system that can power the refuge chamber’s internal life support systems for a minimum of 36hrs, should mine power become cut-off.

Also at the rear of the chamber is the Compressed Air Management System (CAMS), which allows regulated compressed air into the refuge chamber when the pressure inside drops below 200Pa. This process optimises mine air usage and guarantees against over-pressurisation of the refuge chamber.

CAMS’ gas toxicity monitor automatically diverts compressed air if oxygen levels in the airline fall below a set level (18% oxygen in free air), signifying air contamination. Additionally, the incorporated flood protection valve automatically shuts down compressed air to avoid catastrophic and costly chamber damage in the event of water ingress.

Comparison Table

Name Capacity * ITA/BS EN Compliance ** Aura-FX Gas monitoring CAMS Gantry Mobile Portable 24hrs Battery Backup
TunnelSAFE Standard Design 8-20
TunnelSAFE Crescent Design 10-24
TunnelSAFE MSV Design 10-24
TunnelSAFE Gantry Design 10-24
TunnelSAFE Narrow Design 12-24
TunnelSAFE Rail Design 10-24
TunnelSAFE Slim Line 12-24
  • * Capacity Every refuge chamber is built with a certain rated occupancy in mind. The life support systems are designed to safely house this number of people for the designated duration.
  • ** ITA/BS EN Compliance MineARC’s TunnelSAFE Refuge Chambers can be built to comply with British Standard (BS EN 16191:2014) Safety Requirements for Tunnelling Machinery and the ITA’s “Guidelines for the Provision of Refuge Chambers Under Construction.

Related Products

tunneling-tbm-multi-service-vehicle-tunnelsafe-msv-design-12-person

Multi-Service Vehicle Chamber – TunnelSAFE MSV Design

Multi-Service Vehicle Chamber – TunnelSAFE MSV Design Multi-Service Vehicle Chambers are engineered to be mounted to a multi-service vehicle; providing a portable safe haven for tunnelling personnel during routine inspections and maintenance works. As a long term safety option for the entire life of the tunnel, these chambers are robust and fully serviceable. ENQUIRE BROCHURE Product Overview Standard

Read More »
Corded cap lamp_LED cap lamp_Tracking cap lamp_SiriUS-LUX_web

Corded Cap Lamp – SiriUS-LUX

Corded Cap Lamp – SiriUS-LUX L3 Corded Cap Lamps from the SiriUS-LUX range redefine wearable LED lighting designed for underground environments. Specially engineered to improve efficiency and visibility to ensure safe operations, the cap lamp is an essential element in Personal Protective Equipment (PPE). MineARC’s own designed and manufactured cap lamp provides a quality and

Read More »

Satellite UPS System

Satellite UPS System​ MineARC’s Satellite Uninterruptible Power Supply (SUPS) System is a unique, portable battery bank; removing the need for battery and inverter storage at the rear of the refuge chamber. Major features of SUPS includes safer battery replacement, charge balancing, temperature cooling, and improved battery monitoring and diagnostics through MineARC’s GuardIAN. ENQUIRE BROCHURE Product

Read More »